Skip to Main Content »

303® Cleaner & Spot Remover

303® Cleaner & Spot Remover utilizes a proprietary blend of sequester agents, surfactants and hyper-wetting agents to lift and suspend oil, grease and dirt to be easily wiped/rinsed away. It is extremely safe and may be used on all water-safe fabrics and surfaces. The cleaning action increases with warm water, agitation and a longer dwell time.

Normal Cleaning: Spray on 303® Cleaner & Spot Remover until damp. Completely wipe away dirt/grime with damp cloth until clean, rinsing out cloth as required. Allow to dry completely before use.

Heavier Cleaning:
Spray on 303® Cleaner & Spot Remover until wet. Agitate with wet, medium-soft brush or wet cloth. Let stand. Then wipe away dirt/grime as described above. Dry completely before use.

Machine Extraction:
Add 4-8 oz of 303® Cleaner & Spot Remover to 1 gallon of warm water.

Fresh Spills: Use a clean absorbent cloth to blot up as much of the spill as possible. Adjust sprayer nozzle to appropriate size and spray 303® Cleaner & Spot remover on the stain until stain starts to diminish and blot up with clean absorbent cloth. Rinse with water to remove excess cleaner. Dry completely before use.

Spots / Stains:
Spray the spot until wet with 303® Cleaner & Spot Remover.Agitate with wet medium-soft brush or wet cloth and let stand. Then blot up the stain and excess cleaner as described above. If necessary, repeat, agitate and let stand a few minutes before wiping clean. Dry completely before use.