Skip to Main Content »

303® High Tech Fabric Guard Instructions

303® HIGH TECH FABRIC GUARD (Applied with trigger sprayer)

Label Instructions
BEFORE USING 303® HIGH TECH FABRIC GUARD (HTFG): Use only on thoroughly clean textiles, free of soiling and cleaning agent residues. For best cleaning results use 303® Fabric/Vinyl Cleaner or 303® Fabric/Vinyl Convertible Top Cleaner. Always test for colorfastness. Spray a hidden area with 303® HTFG. Wipe sprayed area with a white absorbent cloth. If any color rubs off, DO NOT USE. Use 303® HTFG on indoor and outdoor fabrics, upholstery and carpeting. For all natural and synthetic textiles and blends - solution dyed acrylic, polyester, nylon, cotton, wool, silk and fine leathers including suede.

Directions:  Spray until evenly wet, overlapping sprayed areas. Allow treated material to dry completely before use. Protect other surfaces from overspray. If sprayed onto adjacent surface, wipe up immediately. Note: Reduced coverage when applied with paintbrush or roller. Not for vinyl, clear vinyl, plastics, rubber, fiberglass or imitation suede. Use above 70oF. (Quicker drying/curing and best results on hot day full sun). Treated material must be protected from rain/dew until completely cured. If these steps are done correctly, at this point the material will be water repellent. Curing: 6-12 hours depending on temperature. Coverage 50-75 sq. ft. per 16 oz on lightweight fabric, 40-75 st ft. For heavier fabrics depending on material density and application method. 303® HTFG is odorless when dry.

WARNING: COMBUSTIBLE: Keep product and treated article (until dry) away from heat, sparks or open flame. WARNING: Contains petroleum distillates. Use only as directed. Avoid breathing vapors. Use only in well ventilated areas. Keep persons and pets out of area until treated fabric has dried. Do not use in enclosed areas. (if using indoors use an approved MSHA/NIOSH respirator for removing organic vapors. Use fan to force solvent vapors out of the area.)  Harmful or fatal is swallowed. Intentional misuse through inhalation can be fatal. Do not spray into eyes, mouth or onto skin.
NOTE: Once treated article has dried, warnings do not apply.

FIRST AIDSKIN CONTACT; wash with soap & water. EYE CONTACT; Immediately flush eyes with large amounts of water for at least 15 minutes. If swallowed do not induce vomiting. Call physician immediately.

KEEP OUT OF REACH OF CHILDREN, STORE AT 15-32 C 60oF TO 90oF.

Safe and Effective
PROVEN PERFORMANCE!

 

303® HIGH TECH FABRIC GUARD (Gallon Size)

for indoor and outdoor fabrics, awnings, umbrellas, boat canvas, auto interiors, convertible tops, carpeting, tents, rainwear, snow skiing apparel, silk, suede. BEFORE USING 303® HIGH TECH FABRIC GUARD (HTFG) Use only on thoroughly clean textiles, free of soiling and cleaning agent residue. For best cleaning results use 303® Fabric/Vinyl Cleaner or 303® Fabric/Vinyl convertible top cleaner. always test for colorfastness. Spray a hidden area with 303® HTFG.Spray a hidden area  with 303® HTFG. Wipe sprayed area with a white absorbent cloth. If any color rubs off, DO NOT USE. Use 303® HTFG on indoor and outdoor fabrics, upholstery and carpeting.  

Directions:  Spray until evenly wet, overlapping sprayed areas. Allow treated material to dry completely before use. Protect other surfaces from overspray. If sprayed onto adjacent surface, wipe up immediately. Note: Reduced coverage when applied with paintbrush or roller. Not for vinyl, clear vinyl, plastics, rubber, fiberglass or imitation suede. Use above 70oF. (Quicker drying/curing and best results on hot day full sun). Treated material must be protected from rain/dew until completely cured. If these steps are done correctly, at this point the material will be water repellent. Curing: 5-12 hours depending on temperature. 303® HTFG is odorless when dry.

COVERAGE: For most fabrics and canvas: 500sq ft. per gallon and higher, with proper sprayer and application techniques. Coverage primarily depends on material density. Greater coverage on lighter weight fabrics, less coverage on heavier fabrics and carpeting.

APPLICATION EQUIPMENT: Use spray equipment resistant to solvents. For maximum coverage a low pressure (20-40 psi, lowvolume, airless spray system is 
recommended using an EVEN FLAT FAN TIP such as a 6501E/65015E Though not efficient, paintspray guns and hand pumped garden sprayers may be used with an 
appropriate tip from hardware store.*

*The first 2 digits define the width of the fan, in this case 65o. The second set of digits refers to the tip flow rate (the standard is gallons per minute at 
40 psi): 01= 1 gallons/minute flowrate; 15= 15 gallons/minute. "E" means and even dispersal across the radius of the fan.

WARNING: COMBUSTIBLE: Keep product and treated article (until dry) away from heat, sparks or open flame. WARNING: Contains petroleum distillates. Use only as 
directed. Avoid breathing vapors. Use only in well ventilated areas. Keep persons and pets out of area until treated fabric has dried. Do not use in enclosed areas. (if using indoors use an approved MSHA/NIOSH respirator for removing organic vapors. Use fan to force solvent vapors out of the area.)  Harmful or fatal is swallowed. Intentional misuse through inhalation can be fatal. Do not spray into eyes, mouth or onto skin. NOTE: Once treated article has dried, warnings do not apply.

FIRST AIDSKIN CONTACT; wash with soap & water. EYE CONTACT; Immediately flush eyes with large amounts of water for at least 15 minutes. If swallowed do not induce vomiting. Call physician immediately.

KEEP OUT OF REACH OF CHILDREN, STORE AT 15O-32O C (50O - 90Of).

Sunbrella® is a Registered Trademark of Glen Raven Custom Fabrics, LLC.