- Our Brands
- Tips & Tools
- Where to Buy
- Shop Online
- About Us
- Press & Events
- Private Brands
All DieselPower!® brand Fuel Additives are compatible with each other, and may be blended together. Added dosing of cetane improvers and anti-gel will provide additional benefits in higher concentrations. "Double-dosing" of fuel injector and complete fuel system cleaner (using more than directed on the label) is not damaging — although it may not provide additional benefit.
The Complete Fuel System Treatment contains cetane improver, anti-gel, lubricity and detergent additive. The Complete Fuel System Treatment is stronger and faster acting product. This product cleans the complete fuel system, ports & passages, while the Fuel Injector cleaner is specially formulated to clean only the diesel fuel injectors.
Diesel Fuel contains hydrocarbon waxes that can crystallize and form wax crystals, which can block diesel fuel lines and fuel filters. Anti-gel products stop or prevent this from happening. To be effective, anti-gels must be added to fuel before the fuel gels at a temperature of > -15ºF. When added correctly, DieselPower!® Anti-Gel will allow diesel fuel to continue to flow even at -25° F (-31.7°C) or lower.
You can still add this product, although it will not dissolve the wax that has already gelled in your fuel. You must add the Anti-Gel product before gelling for it to be effective above 15ºF. If you have reason to believe your diesel fuel has gelled, move your vehicle to a warm garage, and wait for the wax to dissolve.
This product should be used any time that more noise is noticed on acceleration, or you notice white smoke when your vehicle is started. You can also use this product to obtain maximum power while towing.
Most gasoline fuel additives are not powerful enough to be beneficial when used in a diesel engine. However, using one will not harm your diesel engine.
Yes, DieselPower!® brand is safe and effective for use in all diesel engines. Just mix it per label instructions. DieselPower!® Maximum Heavy Duty is especially good for hard working “big rig” engines.
DieselPower!® brand products have an indefinite shelf life, provided the cap has not been removed.
On June 1, 2006, the Ultra Low Sulfur Diesel Fuel (ULSD) regulation went into effect. This regulation, mandated by the EPA, was created to reduce emissions in 2007 or newer model diesel vehicles by lowering the sulfur content of diesel fuel to less than 15 parts per million. This regulation requires that ALL diesel fuel additive products must be labeled or stickered stating whether the product complies with the new ULSD regulations (contains less than 15 ppm sulfur), or does not comply (contains more than 15 ppm sulfur). Because the stickered DieselPower!® brand products contained more than 15 ppm sulfur, they are required to have the does not comply sticker. However they are totally safe to use in ALL 2006 and older model diesel engines.
Yes, DieselPower!® brand is safe and effective for use in all diesel engines. Just mix it per label instructions. DieselPower!® Maximum Heavy Duty is especially good for these hard working engines.
Yes, DieselPower!® brand is an E.P.A. approved ultra low sulfur diesel (ULSD) compliant additive for use in all diesel engines.
Yes, all DieselPower!® Fuel Additives contain lubricity additive specially designed to protect all fuel system components from wear.